OASIS supports multiple links per manufacturer. Users may insert URL addresses to view parts, submittals, and other information. These website links are available in multiple locations, including a project, order, submittal, or cut sheet.
Setting up Multiple Website Links
1. Navigate to the Manufacturers page.
2. Open a manufacturer.
3. The "Manufacturer Editor" will appear.
4. Select the "Contact Information" tab.
5. Double-click in the "Kind" field, and type in in "WWW" with an identifier, such as "Basic Information" or "Order Status." This allows users to determine which link to use for what function.
6. Enter the entire URL into the "Number" field.
7. Select "Save and Close."
Accessing Website Information
In a Project
1. Navigate to the Projects page and select a project.
2. The project will open in a new window.
3. Select the "Items" tab, and right-click on the part number.
3. Select "Website(s)" from the drop-down menu. Note: if there is one website available, it will appear in a new window. If there are multiple links, you will be prompted to choose.
In an Order
1. Navigate to the Orders page and select an order.
2 Select the "Items" tab, and right-click on the needed part.
3. Select "Website(s)" from the drop-down menu. Note: if there is one website available, it will appear in a new window. If there are multiple links, you will be prompted to choose.
In a Submittal
1. Navigate to the Submittals page, and select a submittal.
2. Select the "Items" tab, and locate the needed submittal.
3. Select the "www" box. Note: if there is one website available, it will appear in a new window. If there are multiple links, you will be prompted to choose.
In Cut Sheets
1. Select the Manufacturers page.
2. Select the Cut Sheets page from the drop-down list.
3. Locate the needed cut sheet and select "www." Note: if there is one website available, it will appear in a new window. If there are multiple links, you will be prompted to choose.
Comments
0 commentsPlease sign in to leave a comment.